Subaru Legacy 2003 Service Manual page 758

18.Fuel Filler Pipe
A: REMOVAL
1) Release the fuel pressure. <Ref. to FU(H4SOw/
oOBD)-45, RELEASING OF FUEL PRESSURE,
OPERATION, Fuel.>
2) Open the fuel filler flap lid, and then remove the
filler cap.
3) Disconnect the ground cable from battery.
4) Remove the screws holding packing in place.
5) Lift-up the vehicle.
6) Remove the rear right side wheel nuts.
7) Remove the wheel RH (Rear).
FUEL FILLER PIPE
8) Remove the protector RH (Front).
9) Drain fuel from fuel tank. Set a container under
the vehicle, and then remove the drain plug from
fuel tank.
FU-00009
10) Tighten the fuel drain plug, and then install the
protector RH (Front).
Tightening torque:
FU-00470
Tightening torque:
FU-00471
FU(H4SOw/oOBD)-55
FUEL INJECTION (FUEL SYSTEMS)
26 N·m (2.65 kg-m, 19.2 ft-lb)
18 N·m (1.8 kg-m, 13.0 ft-lb)
FU-00443
FU-00444
FU-00444
FU-00443