Subaru Legacy 2003 Service Manual page 306

Hide thumbs Also See for Legacy 2003:
Table of Contents

Advertisement

C: CAUTION
• Wear working clothing, including a cap, protec-
tive goggles, and protective shoes during opera-
tion.
• Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
• Keep the disassembled parts in order and pro-
tect them from dust or dirt.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly, and replacement.
D: PREPARATION TOOL
ILLUSTRATION
ST-499977100
ST-499977400
ST18231AA010
GENERAL DESCRIPTION
TOOL NUMBER
DESCRIPTION
499977100
CRANKSHAFT PUL-
LEY WRENCH
499977400
CRANKSJAFT PUL-
LEY WRENCH
18231AA010
CAMSHAFT
SPROCKET
WRENCH
CO(H4SO)-5
• Be careful not to burn your hands, because each
part in the vehicle is hot after running.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or safety stands at the specified
points.
• Before disconnecting electrical connectors of
sensors or units, be sure to disconnect ground ca-
ble from battery.
Used for fixing crankshaft pulley when loos-
ening and tightening crankshaft pulley bolts.
(2500 cc model)
Used for fixing crankshaft pulley when loos-
ening and tightening crankshaft pulley bolts.
(2000 cc model)
• Used for removing and installing camshaft
sprocket.
• Camshaft sprocket wrench (499207100) is
also available.
COOLING
REMARKS

Advertisement

Table of Contents
loading

Table of Contents