Hyundai Sonata 1991 Shop Manual page 97

CYLINDER BLOCK
CYLINDER BLOCK
COMPONENTS
TORQUE : Nm (kg.em, Ib.ft)
REMOVAL
7.S-12 (S0-120, 5.S-S.7)
Oil pressure switch
Y200AOA
Cylinder block
30-41
(300-420, 22-30)
20Y148
Remove the cylinder head, timing belt train, front case, flywheel,
piston and crankshaft.
For further details, refer to the respective chapters.
Level 1 : No.1 piston ring position with piston at TOC
Level 2 : Center of cylinder
Level 3 : Bottom of cylinder
1. Visually check the cylinder block for scores, rust and corro-
sion. Also check for cracks or any other defects. Correct or
replace the block if defective.
2. Measure cylinder bore with a cylinder gauge at three levels
in directions of A and B.
INSPECTION
Cylinder Block
Y200BOA
m
B
20-66