Hyundai Sonata 1991 Shop Manual page 56

ENGINE AND TRANSAXLE ASSEMBLY
30. Remove the engine mount bolts.
31. Remove the engine mounting bracket from the engine.
32. Slowly raise the chain block (to the extent that the engine
and transaxle weight is not applied to the mounting portions)
and temporarily hold it in the raised condition.
CAUTION
Confirm that all of the cables, hoses, harnesses, connec-
tors etc., are disconnected from the engine.
33. Remove the blind plugs from the inside of the right fender
shield and remove the transaxle mount bracket bolts.
34. Remove the left mount insulator bolt.
While directing the transaxle side downward, lift the engine
and transaxle assembly up and out of the vehicle.
20-25