Table of Contents
Advertisement
MANUAL TRANSAXLE CONTROL
1.
Install the shift lever assy.
2.
Install the colter pins and clips (shift lever side and transaxle
side) with select cable and shift cable.
NOTE:
1)
The flange side of the resin bushing at the shift cable
end should be at the split pin side.
2)
The flange side of the resin bushing at the selector
cable end should be at the lever B end surface.
4.
Remove the retainer and bolts.
5.
Remove the air cleaner.
6.
Remove the colter pins and clips (Transaxle side).
7.
Remove the shift cable and select cable.
INSPECTION
1.
Check the select cable for function and for damage.
2.
Check the shift cable for function and for damage.
INSTALLATION
Y43DB2A
Y43DC2A
3.
Install the retainer and bolts.
4.
Install the air cleaner.
43-13
Hide quick links:
Advertisement
Table of Contents
