Table of Contents
Advertisement
INPUT SHAFT
6.
Remove the 4th speed gear and needle roller bearing, syn-
chronizer ring, 3rd-4th speed synchronizer sleeve.
7.
Remove the needle roller bearing sleeve, 3rd-4th synchron-
izer hub, synchronizer ring, 3rd speed gear, needle roller bear-
ing using the special tool (09432-21300).
+
1.
Check the outer surface of the input shaft where the needle
bearing is mounted for damage or abnormal wear [portion (A)].
2.
Check the splines for damage or wear.
INSPECTION
INPUT SHAFT
NEEDLE BEARING
Y43JB2A
Y43JC2A
(Ill
.
--. . . . . . . . .
- r~
L
~....----
-~
Spline
1.
Combine the needle bearing with the shaft or bearing sleeve
and gear and check that it rotates smoothly without abnor-
mal noise or play.
2.
Check the needle bearing cage for deformation.
SYNCHRONIZER RING
Y43JD1A
Damage and wear
1.
Check the clutch gear teeth for damage and breakage.
2.
Check the internal surface for damage, wear and broken
threads.
Damage and breakage
43-31
Hide quick links:
Advertisement
Table of Contents
