INPUT SHAFT
4.
Install the needle roller bearing and 3rd speed gear to the
input shaft.
5.
Install the 3rd-4th speed synchronizer assembly over the
input shaft using the special tool (09432-21500).
Caution
1. . When installing the synchronizer assembly, make sure
that three synchronizer keys are seated correctly in
respective grooves of the -synchronizer ring.
2.
After installing of the synchronizer assembly, check
that the 3rd speed gear rotates smoothly.
6.
Install the needle roller bearing sleeve .using the special tool
(09432-21500).
7.
Install the synchronizer ring, needle roller bearing. 4th gear
and spacer.
43-34
I
09432-21500
09432-21500