Table of Contents
Advertisement
ENGINE CONTROL
INSPECTION
Y3'KBOA
1.
Check the inner and outer cable for damage.
2.
Check the cable for smooth movement.
3.
Check the accelerator arm for deformation.
4.
Check the return spring for deterioration.
5.
Check the connection of the bushing to end metal fitting.
6.
Check the accelerator switch proper operation.
INSTALLATION
Y3,KCO'
1. When installing the return spring and accelerator arm, apply
multi-purpose grease around each moving point of the
accelerator arm.
2.
Apply sealant to the bolt mounting hole, and tighten the accel-
erator arm bracket.
Tightening torque
Accelerator arm bracket bolts
.
7.8-12
Nm
(80-120
kg.cm,
5.8-7.2
Ib.ft)
/
/'
Apply sealant
31Y165
31Y167
3.
Securely install the resin bushing of the accelerator cable
on the end of the accelerator arm.
4.
Apply multipurpose grease around the cable end.
Accelerator arm
Accelerator cable
31Y168
31-79
Hide quick links:
Advertisement
Table of Contents
