AUTOMATIC TRANSAXLE
8.
Remove the bell housing.
-=o============o=====-
2
9.
Remove the special bolts.
1) Remove the three special bolts connecting the converter
to
th~
drive plate.
NOTE
To remove the special bolts of torque converter, turn
engine crankshaft with a box wrench to bring one of
the bolts to the position appropriate for removal. After
removing the bolt, turn the crankshaft in the same
manner as above and remove all remaining bolts one
after another.
2) After removing the special bolts, push the torque
converter toward the transaxle so that it does not remain
on the engine side.
10. Disconnect the oil cooler hose.
11. Remove the caps and bolts.
45-57