Table of Contents
Advertisement
1.
Install the needle bearing flush with the surface A of the
clutch housing.
ASSEMBLY
CLUTCH HOUSING
Y43PB2A
A
Needle
beanng
2.
Install the control shaft oil seal using a socket wrench.
Oil seal
Socket wrench
3.
Install the neutral return spring assembly, control finger,
interlock plate, stopper body, neutral return spring with the
control shaft.
4.
Install new spring pins using the special tool (09414-
11100).
Caution
1.
Do not reuse the spring pins.
2.
Install the spring pins with their slit at right angle to
the control shaft center.
43-51
Hide quick links:
Advertisement
Table of Contents
