Table of Contents
Advertisement
GENERAL
3.
Using the special tool (09431-21200), tap the drive shaft
oil seal into the transaxle.
4.
Apply a coating of the transaxle fluid to the lip of the oil seal.
Transaxle fluid: GENUINE HYUNDAI ATF AUTOMATIC
TRANSMISSION FLUID OR MOPAR ATF PLUS TYPE
7176, BP AUTRAN MM SP (For Australia), DIAMOND
ATF SP
REPLACEMENT OF SPEEDOMETER CABLE
Y45C61A
09431-21200
1.
Replace the cable assembly if there is a malfunction.
2.
When connecting the cable to the meter, insert the cable
until its stopper properly fits to the meter side groove.
3.
Install the grommet so that, as shown in the illustration, the
cable attachment part and the projecting part are horizontal.
CAUTION
The cable arrangement should be made so that the radius
of cable bends is 150 mm (5.9 in.) or more.
4.
At the transaxle end of the speedometer cable, the key joint
should be inserted into the transaxle, and the nut should be
securely tightened.
CAUTION
If the cable is not correctly and securely connected, it may
cause
incorrect
indication
by
the
speedometer,
or
abnormal noise. Be sure the connect it correctly.
45-45
Hide quick links:
Advertisement
Table of Contents
