Hyundai Sonata 1991 Shop Manual page 445

1. Remove the drain plug and drain out the transaxle oil.
2. Remove the air cleaner assembly.
REMOVAL
AUTOMATIC TRANSAXLE
Y45FA1A
3. Remove the control cable.
4. Remove the speedometer cable.
5. Disconnect the pulse generator connector, inhibitor switch
connector, kickdown servo switch connector, solenoid
connector.
6. Remove the starter motor.
7. Remove the stabilizer bar, tie rod end, lower arm ball joint,
drive shaft under cover.
(Refer to drive shaft and front axle).
45-56