Hyundai Sonata 1991 Shop Manual page 388

MANUAL TRANSAXLE ASSEMBLY
27. Install the intermediate gear using the special tool
(09432-21500).
28. Install the 5th speed gear and needle roller bearing synchron-
izer ring, synchronizer hub.
29. Install the 5th speed shift fork and the 5th speed synchron-
izer sleeve at the same time.
30. Install the spring pin using the special tool (09414-11100).
09432-21500
09414-11100
31. When installing, make sure that the slit of the spring pin
is aligned with the shift rail center line.
Caution
Do not reuse the spring pin.
Slit-+----: Spring
pin
Shift rail
32. Reassembly of lock nuts.
1) Install the special tool (09432-21101) onto the input
shaft.
2) Screw a bolt [10 mm (0.39 in.)] into the hole on the sur-
face of clutch housing and attach a spinner handle to the
special tool (09432-21101).
43-60