Table of Contents
Advertisement
CLUTCH COVER AND DISC
4.
Apply a coating of the specified grease to the clutch disc
spline, and then use a brush to rub it in.
Specified grease:
MOLYWHITE TA NO.2
5.
Using the special tool (clutch disc guide), position the clutch
disc to the flywheel.
6.
Install the clutch cover assembly. Tighten the bolts a little
at a time, working in a diagonal sequence, finally tightening
them to the specified torque.
7.
Before installing the transmission assembly, apply a coating
of the specified grease to the input shaft spline, and then
rub in by using a brush.
Specified grease:
MOLYWHITE TA NO.2
41-24
Flywheel
Nl±:::~'H--Clutch
disc
Clutch cover
assembly
Hide quick links:
Advertisement
Table of Contents
