Table of Contents
Advertisement
1.
Install the synchronizer hub and sleeve so that they are posi-
tioned as shown in the figure.
ASSEMBLY
INPUT SHAFT
Y43JH2A
Clutch housing side
. .
30o~lL
Identificatron mark
2.
The synchronizer sleeve has teeth missing at six portions.
Assemble the hub to the sleeve in such a way that the center
tooth "T" between two missing teeth will touch the synchron-
izer key.
3.
Install the synchronizer spring in such a way that its stepped
portions will rest on the synchronizer keys.
Synchronizer key
Key
~
Caution
When installing the synchronizer springs. make sure that
the front and rear ones are not faced in same direction.
Spring
stepped
part
43-33
Hide quick links:
Advertisement
Table of Contents
