Table of Contents
Advertisement
1.
Check the outer surface of the intermediate shaft where the
needle bearing is mounted for damage or abnormal wear [por-
tion
(All.
2.
Check the splines for damage and wear.
1.
Combine the needle bearing with the shaft or bearing sleeve
and gear and check that it rotates smoothly without abnor-
mal noise or play.
2.
Check the needle bearing cage for deformation.
INSPECTION
INTERMEDIATE SHAFT
NEEDLE BEARING
INTERMEDIATE SHAFT
Y43KB2A
Y43KC2A
SYNCHRONIZER RING
Y43KOZA
Oamage and wear
1.
Check the clutch gear teeth for damage and breakage.
2.
Check the internal surface for damage, wear and broken
threads.
3.
Force the synchronizer ring toward the clutch gear and check
clearance "A". Replace if it is out of specification.
Limit: 0.5 mm (0.02 in.)
Damage and breakage
---..I
A
Synchronizer ring
Ge;tf
43-39
Hide quick links:
Advertisement
Table of Contents
