Table of Contents
Advertisement
GENERAL
7.
Insert a plain screwdriver from the top of the timing belt
cover. Slightly push the tensioner bracket in the tensioning
direction, and then release. Now belt tension will be automat-
ically adjusted.
CAUTION
The purpose of pushing the tensioner with a screwdriver
is to loosen tensioner which might have stuck due to many
hours of operation in a preset position.
Insert the
screwdriver
here
20Y015
20Y016
~
III
Timing belt
~~-,-.1~~-'l"-
tensioner
8.
First tighten the timing belt tensioner mounting bolt (lower
side), and then tighten the mounting nut (upper side).
CAUTION
Be sure to tighten the bolt (lower side) first. If the nut is
tightened first, the tensioner will rotate with it and belt
tension may become loose.
9.
Install the access cover. The access cover can be easily
installed by sliding in such a way that the hook will pass
between the guides.
10. Install the timing belt front upper cover.
Access
cover
Hook
«=~:=-
Guides
20Y01S
20-18
Hide quick links:
Advertisement
Table of Contents
