Table of Contents
Advertisement
AUTOMATIC TRANSAXLE ASSEMBLY
13. Tighten the lock nut to the specified torque.
Transfer lock nut:
200-230 Nm (2000-2300 kg.cm, 145-166 Ib.ft)
14. After installing the special tool, measure the end play of the
transfer shaft; then select the spacer(s) needed to obtain the
standard value, and refit.
Transfer shaft end play: 0-0.025 mm (0-0.0010 in.)
15. Using a punch, lock the lock nut to prevent rotation.
16. Attach the transfer cover.
17. Insert an assembly of the annular gear, output flange,
transfer drive gear and bearing into the case.
45-78
Hide quick links:
Advertisement
Table of Contents
