Table of Contents
Advertisement
MAINTENANCE SERVICE
1.
Refer to page 58-5 for air-bleeding procedures.
2.
Connect a vinyl tube to the bleeder screw of each wheel
cylinder. Put the other end of the vinyl tube in a vessel for
receiving the brake fluid.
CHANGING OF THE BRAKE FLUID
lOfCOA
3.
Depress the brake pedal a few times. Then loosen the
bleeder (with the brake pedal still depressed), and tighten it
after the brake fluid stops flowing.
4.
Repeat the above operation until to air bubbles are in the
brake fluid.
5.
Repeat these steps for the other cylinders.
6.
Add fresh brake fluid up to the "MAX" level in the reserve
tank.
Brake fluid
DOT 3 or equivalent
CHECKING OF THE TIRE INFLATION PRESSUE
Check the Tire inflation Pressures as Follows.
Yl0FDOA
TIRE INFLATION PRESSURE (Check with Tires Cool)
Tire size
Front
Rear
P185170 R 14
207 kPa (30 psi)
207 kPa (30 psi)
P195170 R 14 (AI wheel)
T125170 0 15 (Temporary)
414 kPa (60 psi)
414 kPa (60 psi)
ROAD TEST
Yl0FEOA
Drive the vehicle and check for abnormal conditions.
1. Check for oil, fluid, fuel, water and exhaust gas leaks.
2.
Check free play of clutch pedal and brake pedal.
3.
Check operation of brake booster.
4.
Check operation of service brake and parking brake systems.
5.
Check stroke of parking brake lever.
6.
Check driveability of engine.
7.
Che~k
condition of instruments, gauges, indicators, exterior
lamps, heater and ventilators.
8.
Check abnormal noise of each part.
10-19
Hide quick links:
Advertisement
Table of Contents
