Table of Contents
Advertisement
ASSEMBLY
INTERMEDIATE SHAFT
Y43KHQA
..
,.
Install the tapered roller bearing over the intermediate shaft
using the special tool (09432-21500).
CAUTION
When installing the bearing, push on the inner race only.
2.
Install the 1st synchronizer ring noting its identification mark.
3.
Combine the 1st-2nd speed synchronizer hub and sleeve.
09432-21500
Clutch housing side
Identification
4.
The synchronizer sleeve has teeth missing at six portions.
Assemble the hub to the sleeve in such a way that the center
tooth
"r
between two missing teeth will touch the synchron-
izer key.
5.
Install the synchronizer spring in such a way that its stepped
portions will rest on the synchronizer keys.
Caution
When installing the synchronizer springs, make sure that
the front and rear ones are not facing in the same direc-
tion.
T
Spflng stepped
part
One-loath-skipped
parts
Key
43-41
Hide quick links:
Advertisement
Table of Contents
