Table of Contents
Advertisement
CLUTCH RELEASE CYLINDER
INSPECTION
Y41GBOA
1.
Check the clutch release cylinder for fluid leakage.
2.
Check the clutch release cylinder boots for damage.
CAUTION
1) Cover with rags to prevent the piston from popping
out.
2)
Apply compressed air slowly to prevent brake fluid
from splashing.
rod, boots.
cylinder using com-
DISASSEMBLY
1.
Remove the valve plate, spring, push
2.
Remove the piston from the release
pressed air.
Y41GCOA
INSPECTION
Y41GDOA
1.
Check the release cylinder bore for rust and damage.
2.
Measure the release cylinder bore at three locations (bottom,
middle and top) with a cylinder gauge and replace the release
cylinder assembly if the clearance to the piston outside
exceeds the limit.
Limit:
0.15
mm
(0.006
in.)
Cylinder gage
Specified brake fluid: DOT 3
2.
Install the valve plate, spring, union.
1. Apply specified brake fluid to the release cylinder body inside
and outer surface of the piston and piston cup and push the
piston cup assembly in the cylinder.
Y41GEOA
REASSEMBLY
41-19
Hide quick links:
Advertisement
Table of Contents
