Table of Contents
Advertisement
Tightening torque
Drain plug .... 34-44 Nm (350-450 kg.cm, 25-33 Ib.lt)
1.
Warm up the engine.
2.
Remove the filler cap (on the rocker cover), and drain the
engine oil (with the drain plug removed).
3.
Tighten the drain plug.
MAINTENANCE SERVICE
CHANGING THE ENGINE OIL
MAINTENANCE SERVICE
Y10EAOA
4.
Fill the crankcase with fresh oil through the filler port.
Dry fill
3.90 lit. (4.12 U.S.qts., 3.43 Imp,qts)
Drain and refill
Without oil filter: 2.9 lit (3.06 U.S.qts., 2.55 Imp.qts.)
With oil filter: 3.3 lit (3.49 U.S.qts., 2.90 Imp.qts.)
5.
Pull the dipstick out in order to check the oil level.
6.
Install the filler plug.
7.
Recheck the level of the engine oil alter a road test.
Recommended engine oil
API SF, SF/CC or SG
SAE 20W-20, 20W-40, 20W-50 (ABOVE 32°F OR O°C)
10W-30, 10W-40, lOW-50 (ABOVE -10°F OR -23°C)
5W-20, 5W-30, 5W-40 (BELOW 60°F OR 16°C)
REPLACEMENT OF THE ENGINE OIL FILTER
Y10E8OA
1.
Replace the oil filter at the time of every oil change.
2.
Use a filter wrench (available commercially) to remove the
oil filter.
3.
Drain the oil in the filter.
10-7
Hide quick links:
Advertisement
Table of Contents
