AUTOMATIC TRANSAXLE ASSEMBLY
34.
Apply a coating of petrolatum to the wave spring and attach
it to the center support.
35.
Install two new O-rings to the center support.
Wave spring
36. After applying a coating of ATF to the O-rings. install the
special tool
(09453-21310)
to the center support. and
install within the case.
Caution
Be sure that the wave spring is not out of position.
37. Install the snap ring.
Caution
The mating hole of the snap ring must be aligned with the
installation hole of pulse generator A.
/
)
45-84