Table of Contents
Advertisement
TIMING BELT
8.
Move tensioner fully toward water pump and temporarily
secure tensioner.
9. Align timing mark on camshaft sprocket with tJ1e timing mark
on the cylinder head.
10. Align timing mark on crankshaft sprocket with the timing
mark on front case.
11. Align timing mark on oil pump sprocket with the timing mark
on front case.
Tensioner
Timing mark
(on cylinder head)
Water pump
Nut
Bolt
20Y055
Timing mark
(punch on sprocket)
Timing mark
(notch in sprocket)
20Y056
12. When timing mark on oil pump pulley is aligned with the
timing mark on front case, be sure to remove plug on left
side of cylinder block and insert a screwdriver having a shaft
8 mm (0.3 in.) in diameter. If it can be inserted 60 mm (2.36
in.) or more, alignment is correct.
If it can be inserted only 25 mm (1 in.), turn oil pump
sprocket one revolution and realign timing marks. Check to
ensure that screwdriver can be inserted more than 60 mm
(2.36 in.). Keep screwdriver inserted until installation of tim-
ing belt is finished.
20-31
Hide quick links:
Advertisement
Table of Contents
