Table of Contents
Advertisement
1.
Remove the select lever assembly and the select lever shoe.
2.
Remove 'the interlock plate bolt and gasket.
DISASSEMBLY
CLUTCH HOUSING
Y43PA2A
3.
Drive out the spring pin from the control finger using the
special tool
(09414-11000).
4,
Drive out the spring pin from the stopper body using the spe-
cial tool
(09414-11000).
5.
Pull out the control shaft and remove the control shaft boots
and oil seal.
6.
Remove the neutral return spring assembly, control finger,
interlock plate, stopper body, neutral return spring.
7.
Remove the control shaft oil seal the needle bearings.
43-50
Hide quick links:
Advertisement
Table of Contents
