Table of Contents
Advertisement
INPUT SHAFT
3.
Force the synchronizer ring toward the clutch gear and check
clearance "A". Replace if it is out of specification.
Limit:
0.5
mm
(0.02
in.)
_~A
Synchronizer nng
Ge;u
SYNCHRONIZER SLEEVE AND HUB
Y43JE2A
1.
Combine the synchronizer sleeve and hub and check that
they slide smoothly.
2.
Check that the sleeve is free from damage at its inside front
and rear ends.
3.
Check for wear of the hub.end surfaces (in contact with each
speed gear).
Caution
Replace the synchronizer hub and sleeve as a set.
/
J
1.
Check for wear of the synchronizer key center protrusion.
2.
Check the spring for weakness, deformation and breakage.
1.
Check the bevel gear and clutch gear teeth for damage and
wear.
2.
Check the synchronizer cone for rough surface, damage and
wear.
3.
Check the gear bore and front and rear ends for damage and
wear.
SYNCHRONIZER KEY AND SPRING
SPEED GEARS
Y43JF2A
Y43JG2A
43-32
Hide quick links:
Advertisement
Table of Contents
