Hyundai Sonata 1991 Shop Manual page 477

AUTOMATIC TRANSAXlE ASSEMBLY
50. Install the differential assembly.
51. If end play which was measured and recorded at
disassembly is not standard value, 'adjust end play to
specification by selecting thrust washer #1.
Standard value:
0.3-1.0
mm
(0.012-0.040
in.)
When thrust race is replaced with that of different thickness,
replace also thrust race #3 located between oil pump and
front clutch with washer of proper thickness corresponding
to thrust race.
Find correct pair of thrust races (metal) and thrust washers
(fiber) from following table.
Thrust washer #1 (metal)
Thrust race #3 (fiber)
Thickness mm (in.)
Thickness mm (in.)
1.4 (0.055)
1.0 (0.039)
1.4 (0.055)
1.2 (0.047)
1.8 (0.071)
1.4 (0.055)
1.8,(0.071 )
1.6 (0.063)
2.2 (0.087)
1.8 (0.071)
2.2 (0.087)
2.0 (0.079)
2.6 (0.102)
2.2 (0.087)
2.6 (0.102)
2.4 (0.095)
Example:
When thick thrust race is selected. thrust washer is one to be
paired with it.
52. Attach the reused thrust washer #1, or the one selected in
step 51 to the front clutch by using petrolatum.
45-88