Table of Contents
Advertisement
MANUAL TRANSAXLE ASSEMBLY
5.
Remove the spring pin using the special tool (09414-
11000).
09414- 11000
6.
Removal of the lock nuts
1) Unstake lock nuts of the input shaft and intermediate
shaft.
2)
Shift the shift lever in reverse using the control lever and
select lever.
SeleCI lever
--~
Control lever
~:;o-,-~/:-~\'.'
3)
Install the special tool (09432-21101) onto the input
shaft.
4)
Screw a bolt 10 mm (0.39 in.) into the hole on the
periphery of clutch housing and attach a spinner handle
to the special tool.
5)
Remove the lock nut, while using the bolt as a spinner
handle stopper.
Spinner
handle
43-21
Hide quick links:
Advertisement
Table of Contents
