Hyundai Sonata 1991 Shop Manual page 370

INTERMEDIATE SHAFT
6. Install the needle roller bearing, 2nd gear, 1st-2nd speed syn-
chronizer assembly over the intermediate shaft using the spe-
cial tool (09432-21500).
Caution
1. When installing the synchronizer assembly, make sure
that three synchronizer keys are seated correctly in
respective grooves of the synchronizer ring.
2, After installation of the synchronizer assembly, check
that the 3rd speed gear rotates smoothly.
7. Install the needle roller bearing, 1st 'speed gear, bearing
sleeve together using the special tool (09432-21500) as
illustrated.
8. Install the tapered roller bearing using the special tool
(09432-215OO).
Caution
When installing the bearing, push on the inner race only,
9. Install the snap ring.
43-42
09432-21500
09432-21500
09432-21500