TRANSAXLE CONTROL
10. Place the shift lever in the "N" position, and then turn the
sleeve so that the clearance between the sleeve and the
lever assembly end in within the standard value.
Standard value (A) : 15.2-15.9 mm (0.598-0.625 in.)
NOTE
Be sure to face B of the adjusting cam to the push button
(driver's side).
11. Install the selector knob.
12. Install the console box. (Refer to BODY GROUP).
A
Sleeve
Lever
assembly
1.
Eliminate slack from the control cable with the adjusting
flange nut and check that the select lever operates smoothly.
2.
Driving the car, check that the transaxle is set in the proper
range when the select lever is shifted to each position.
ADJUSTMENT OF CONTROL CABLE
Y45DD1A
45-52