Hyundai Sonata 1991 Shop Manual page 327

INSTALLATION
CLUTCH COVER AND DISC
Y41HFOA
1. Apply a coating of the specified grease ot the point of contact
with the fulcrum and the point of contact with the release
bearing.
Specified grease MOLYWHITE TA NO.2
Caution
When installing the clutch, apply grease to each part, but
be careful not to apply excessive grease; excessive grease
will cause clutch slippage and shudder.
2. Apply a coating of the specified grease to the end of the
release cylinder's push rod and to the push rod hole in the
release fork.
Specified grease MOLYWHITE TA NO.2
3. Pack the inner surface of the clutch release bearing and the
groove with the specified grease.
Specified grease: MOLYWHITE TA NO.2
Apply grease
41-23