Hyundai Sonata 1991 Shop Manual page 190

AUTOMATIC SPEED CONTROL (CRUISE)
CHECKING SPEED REDUCTION SETTING
Y27E60A
1. Set to the desired speed.
2. Press the COAST button (of the control switches).
3. Check to be sure that the alarm sounds when the switch
is pressed, that deceleration continues while the switch is
pressed, and that when it is released the constant speed at
the time when it was released becomes the driving speed.
NOTE
When the vehicle speed reaches the low limit [approxi-
mately 40 km/h (25 mph)) during deceleration, the auto-
matic speed control will be cancelled.
CHECKING AUTOMATIC SPEED CONTROL CANCELA-
TIO N
Y27E70A
1. Set the automatic speed control.
2. Check to be sure that there is a return to ordinary driving
when either of the operations below is performed.
1) The brake pedal is depressed.
2) The clutch pedal is depressed. (Vehicles with a manual
transmission)
3) The shift lever is moved to the "N" range. (Vehicles with
an automatic transmission)
4) The automatic speed control MAIN switch is switched
OFF.
CHECKING RETURN TO THE SET SPEED BEFORE
CANCELLATION
Y27ESOA
1. Set the automatic speed control.
2. Check to be sure that the automatic speed control is can-
celled when either of the operations below is performed.
1) The brake pedal is depressed.
2) The clutch pedal is depressed. (Vehicles with a manual
transmission).
3) The shift lever is moved to the "N" range. (Vehicles with
an automatic transmission).
3. Press the RESUME button (of the control switches) while driv-
ing at a vehicle speed of approximately 40 km/h (25 mph)
or higher.
4. The alarm will sound when the switch is pressed, there will
be a return to the automatic speed control speed before the
automatic speed control speed will be cancelled and the vehi-
cle will travel at the constant speed.
-
.'
-
INDIVIDUAL PARTS INSPECTION
CHECKING AUTOMATIC SPEt:D CONTROL
SWITCH
Refer to Group 90 Multifunction switch.
Y27E90A
27-71