CRANKSHAFT
13. Install flywheel and tighten bolts to specified torque.
Check clutch mounting surface for runout.
MIT
- - ! - - -
Flywheel
'L..-lUt--+--Pilot bearing
rr. . . . . . . . . .
n r1~+--Flywheel bolt
Ring gear
- - - - + 0
Identifiaction .
mark
Tightening torque
Flywheel bolts
.
127-137 Nm (1,300-1,400 kg.cm, 94-101 Ib.ft)
Runout
0.1 mm (0.004 in.) max.
20Y146
14. With an Automatic Transaxle, install adapter and drive
plate and tighten bolts to specified torque.
AIT
Tightening torque
Drive plate bolts
.
127-137 Nm (1,300-1,400 kg.cm, 94-101 Ib.ft)
Ring gear
Adapter
Adapter plates
~--Drive
plate
"L"\
Drive plate bolt
Crankshaft bushing
20Y147
20-65