Hyundai Sonata 1991 Shop Manual page 86

FRONT CASE, OIL PUMP AND COUNTER BALANCE SHAFT
L
=
20 (0.79)
9. Install oil filter bracket and gasket and tighten front case
mounting bolts.
Tightening torque
Front case bolts .
20-26 Nm
(200~270
kg.cm, 14-20 Ib.ft)
Oil filter bracket bolt .
15-22 Nm (150-220 kg.cm, 11-16 Ib.ft)
10. Install plug cap.
L = 20
(0.79)
L=40
4,=~~~'
(1.57)
Oil filter
bracket
L=length of bolt mm (in.)
Also tighten tensioner
20Yl20
11. Install the relief plug and gasket, and tighten plug.
12. Install the oil screen and gasket.
13. Clean gasket surfaces of cylinder block and oil pan.
14. Apply sealant into groove of oil pan flange.
CAUTION
Make the first cut from the end of the nozzle furnished
with sealant to apply sealant approx. 4 mm in thickness.
After application of sealant, do not exceed 15 minutes
before installing the oil pan.
15. Install the oil pan and tighten the bolts to the specified
torque.
Both hole
portion
20Yl22
20Y123
20-55