Hyundai Sonata 1991 Shop Manual page 63

TIMING BELT
13. Install timing belt. While making sure that tension side of
belt is not slackened, install timing belt onto crankshaft
sprocket, oil pump sprocket and camshah sprocket in that
order.
14. Loosen tensioner mounting bolt and nut. And tensioner will
be moved by spring and will apply tension to belt.
15. Check that portion of belt which is indicated by arrow A to
make sure that it is not floating up.
16.
Tighten tensioner mounting nut and bolt.
Tighten slot side bolt before tightening fulcrum side nut. If
fulcrum side nut is tightened earlier, tension bracket will be
turned together and belt will be overtensioned.
17. Check to ensure that timing marks on all sprockets are in
alignment with respective timing marks.
18. Turn the crankshaft clockwise.
CAUTION
Do not turn crankshaft in reverse direction. Crankshaft
should be turned clockwise only.
19. Loosen tensioner mounting nut and bolt.
20. Tighten tensioner mounting nut and bolt.
Be sure to tighten fulcrum side nut and bolt in step 16.
Tension side
Tension side
20Y059
! 1. Check to ensure that when center of belt span on tension
f
side and seal line of under cover are held between thumb
and forefinger, as illustrated, clearance "C" between belt and
seal line is as follows:
Clearance "C" Approx. 14 mm (0.55 in.)
20-32
20Y060