ON-BOARD DIAGNOSTIC [AUDIO]
AUDIO
STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE
NOTE:
All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio Repair Order
•
Form.
1. Turn the ignition switch to the ACC or ON position.
2. While pressing the POWER button, simultaneously press the AM button and the TAPE/MD button for 2
s or more .
1 AM button
2 TAPE/MD button
3 SEEK button
4 POWER button
NOTE:
If several DTCs are in the memory, they can be displayed using the SEEK button.
•
3. To stop the on-board diagnostic test mode, turn the ignition switch to the LOCK position.
(w)
RX-8 Body
Page 277