Mazda RX-8 Manual page 1496

2. Access and monitor PIDs using WDS or equivalent.
Active Command Modes Procedure
NOTE:
When driving, the ABS motor and each valve automatically turn ABS_POWER on, and then each
•
command on. ABS_POWER regulates the power supply for the ABS motor and 8 valves.
1. Connect WDS or equivalent to the vehicle DLC-2 16-pin connector.
2. Turn the ignition switch to the ON position (engine off) or start the engine.
3. Activate active command modes using WDS or equivalent.
DTC Table
DTC
WDS or
System malfunction location
equivalent
B1318 Power supply system
B1342 ABS HU/CM system
C1095 Pump motor, motor relay system
C1096 Pump motor, motor relay system
C1140 ABS HU/CM (pump) system
C1145 RF ABS wheel-speed sensor system
C1148 RF ABS wheel-speed sensor system
C1155 LF ABS wheel-speed sensor system
Page
(See DTC B1318 [ABS] .)
(See DTC B1342 [ABS] .)
(See DTC C1095, C1096 [ABS] .)
(See DTC C1095, C1096 [ABS] .)
(See DTC C1140 [ABS] .)
(See DTC C1145, C1155, C1165, C1175 [ABS] .)
(See DTC C1148, C1158, C1168, C1178, C1234,
C1233, C1235, C1236 [ABS] .)
(See DTC C1145, C1155, C1165, C1175 [ABS] .)
(w) RX8 - Brakes
Page 82