Mazda RX-8 Manual page 1383

Hide thumbs Also See for RX-8:

Table of Contents

5 Tripod joint

7 Shaft and ball joint component

Boot Band (axle side) Disassembly Note

Remove the boot band only if there is an abnormality.

1. Remove the boot band using end clamp pliers.

Boot Band (Differential Side) Disassembly Note

1. Remove the crimp of the clip using a flathead screwdriver.

Outer Ring Disassembly Note

1. Place an alignment mark on the drive shaft and the outer ring.

RX-8 Power Train

Troubleshooting