Front Drain Hose Installation - Mazda RX-8 Manual

i. Sunvisor(See SUNVISOR REMOVAL/INSTALLATION .)
j. Assist handle(See ASSIST HANDLE REMOVAL/INSTALLATION .)
k. Headliner(See HEADLINER REMOVAL/INSTALLATION .)
2. Disconnect the front drain hose from the sunroof frame.
3. Remove the front drain hose from the clips.
4. Pull the front drain hose into the vehicle interior and remove the front drain hose.

FRONT DRAIN HOSE INSTALLATION

CAUTION:
If the front drain hose is pinched or bent at any point, the water in the hose may not drain and could leak
•
inside the vehicle.During and after installation of the trims and headliner, always make sure there is no
interference with the front drain hose.Correct any abnormality if found.
1. Apply soapy water to the part of the sunroof frame where the front drain hose is inserted.
2. Insert the front drain hose end into the sunroof frame.
(w) RX-8 Body
Page 56