Mazda RX-8 Manual page 1367

Tightening torque
811 N·m {82112 kgf·cm, 7297 in·lbf}
o
10. Install the catalytic converter. (See EXHAUST SYSTEM REMOVAL/INSTALLATION .)
11. Connect the negative battery cable.
12. Install the battery cover.
13. Install the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION .)
Resistance Inspection (Off-Vehicle)
1. Remove each solenoid valve. (See SOLENOID VALVE REMOVAL/INSTALLATION .)
2. Measure the resistance of each solenoid valve individually.
If not within the specification, replace the solenoid valve. (See SOLENOID VALVE
•
REMOVAL/INSTALLATION .)
Pressure control solenoid
Resistance (reference value)
12.316.3 ohms
o
Shift solenoid A, B, C and F
Resistance (reference value)
2.74.4 ohms
o
TCC solenoid
o
o
(w) RX-8 Transmission (Manual & Auto)
Page 342