Front Fog Light Aiming - Mazda RX-8 Manual

Hide thumbs Also See for RX-8:

Table of Contents

2. Remove the front side marker lights.(See FRONT SIDE MARKER LIGHT

REMOVAL/INSTALLATION .)

3. Remove the front bumper.(See FRONT BUMPER REMOVAL/INSTALLATION .)

4. Disconnect the connector.

5. Remove screws A and pull back the front fog light cover in the direction of the arrow.

6. Remove screw B, then remove the front fog light cover.

7. Remove screws C, then remove the front fog light.

8. Install in the reverse order of removal.

9. Adjust the front fog light aiming.(See FRONT FOG LIGHT AIMING .)

FRONT FOG LIGHT AIMING

1. Adjust the tire pressure to the specification.