Mazda RX-8 Manual page 1639

Hide thumbs Also See for RX-8:

Table of Contents

REAR HEAT DUCT

REAR HEAT DUCT REMOVAL/INSTALLATION

1. Remove the following parts:

a. Front seat (See FRONT SEAT REMOVAL/INSTALLATION .)

b. Rear seat (See REAR SEAT REMOVAL/INSTALLATION .)

c. Inner scuff plate (See INNER SCUFF PLATE REMOVAL/INSTALLATION .)

d. Ashtray illumination bulb (See ASHTRAY ILLUMINATION BULB

REMOVAL/INSTALLATION .)

e. Console (See CONSOLE REMOVAL/INSTALLATION .)

f. Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)

g. Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION .)

h. Seat belt rail (See FRONT SEAT BELT REMOVAL/INSTALLATION .)

i. Floor covering (See FLOOR COVERING REMOVAL/INSTALLATION .)

2. Remove in the order indicated in the table.

1 Rear heat duct (LH)

2 Rear heat duct (RH)

3. Install in the reverse order of removal.

Troubleshooting