CONTROL VALVE BODY INSTALLATION
On-Vehicle Installation
CAUTION:
Do not move the manual valve in the direction of arrow to prevent the pin for manual valve rotation
•
prevention from falling from the control valve body.
1. Align the manual valve and the manual plate and install the control valve body.
2. Install the installation bolts and connect the connectors as shown in the figure.
Bolt Bolt length below the head (mm {in})
A
30 {1.181}
B
40 {1.575}
Tightening torque
6.98.8 N·m {7189 kgf·cm, 6277 in·lbf}
o
3. Install the oil pan and a new gasket to a new oil pan installation bolts.
(w)
RX-8 Transmission (Manual & Auto)
Page 296