Condenser Installation Note
1. When replacing the new condenser, add compressor oil to the refrigeration cycle.
Supplemental amount (approx. quantity)
20 ml {20cc, 0.7 fl oz}
o
CONDENSER INSPECTION
1. Inspect the condenser for cracks, damage, and oil leakage.
If there is any malfunction, replace the condenser.
•
2. Visually inspect the fins for clogging of foreign material.
If any fins are clogged, remove the foreign material.
•
3. Visually inspect the fins for bending.
If there is any bending, use the end of a flathead screwdriver to straighten fins.
•
Notes:
(w)
RX-8 - HVAC
Page 14