Mazda RX-8 Manual page 1970

Hide thumbs Also See for RX-8:

Table of Contents

2. Connect a 1.5 V battery to the center speaker and verify that sound is output from the center speaker.

If no sound is output, replace the center speaker.

REAR TWEETER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:

a. Rear seat(See REAR SEAT REMOVAL/INSTALLATION .)

b. Console(See CONSOLE REMOVAL/INSTALLATION .)

c. Tire house trim(See TIRE HOUSE TRIM REMOVAL/INSTALLATION .)

d. Rear pillar trim(See REAR PILLAR TRIM REMOVAL/INSTALLATION .)

e. Rear package side trim(See REAR PACKAGE TRIM REMOVAL/INSTALLATION .)

3. Remove in the order indicated in the table.

2 Rear tweeter

4. Install in the reverse order of removal.

REAR TWEETER INSPECTION

1. Verify that sound is output from the rear speaker.

If sound is output, go to the next step.

If no sound is not output, inspect the rear speaker and the related wiring harnesses.

2. Remove the main amplifier.(See AUDIO AMPLIFIER REMOVAL/INSTALLATION .)

3. Verify that the continuity between the rear tweeter and the main amplifier is as indicated in the table.

If not as indicated in the table, repair or replace the related wiring harnesses.

If as indicated in the table, replace the rear tweeter.

Troubleshooting