DRIVE SHAFT
REAR DRIVE SHAFT
REAR DRIVE SHAFT LOCATION INDEX
1 Rear drive shaft
REAR DRIVE SHAFT INSPECTION
1. Verify that the drive shaft is not twisted or damaged.
If there is any malfunction, replace the applicable part.
•
2. Inspect the dust boot for damage and cracks.
If there is any malfunction, replace the applicable part.
•
3. Move the spline and joint up and down, left and right by hand and verify that there is no roughness.
If there is any malfunction, replace the applicable part.
•
REAR DRIVE SHAFT REMOVAL/INSTALLATION
CAUTION:
(w)
RX-8 Power Train
Page 7