Mazda RX-8 Manual page 1484

Hide thumbs Also See for RX-8:

Table of Contents

PARKING BRAKE LEVER REMOVAL/INSTALLATION

1. Remove the propeller shaft.

2. Remove the front console.

3. Remove in the order indicated in the table.

4. Install in the reverse order of removal.

5. After installation, inspect the parking brake stroke and adjust if necessary.

1 Parking brake switch connector

2 Adjusting nut

3 Parking brake lever

4 Parking brake switch

6 Rear parking brake cable

7 Front parking brake cable

RX8 - Brakes

Troubleshooting