LCD Inspection
1. With the audio power on, press the POWER button and simultaneously press the SEEK button (upper)
for approx. 1 s .
2. Inspect according to the following table:
INSPECTION
Start the LCD
inspection mode.
3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.
Button Inspection
1. With the audio power on, press the POWER button and simultaneously press the CLOCK button for
approx. 1 s .
2. Inspect according to the following table:
INSPECTION
Start the
•
button inspection
mode.
Press all
•
buttons.
DISPLAY
DISPLAY ACTION
sounds.
does not
sound.
ACTION
The characters
displayed on the
LCD are not
truncated or
faint.
Except above
UNIT
DISASSEMBLY/ASSEMBLY .)
The buzzer
The button is normal.
The buzzer
Replace the base unit. (See AUDIO UNIT
DISASSEMBLY/ASSEMBLY .)
The LCD is normal.
Replace the base unit. (See AUDIO
(w)
RX-8 Body
Page 304