11. Remove the manual shaft nut.
12. Remove the washer and manual shaft lever component.
13. Loosen the TR switch mounting bolts.
CAUTION:
Improper adjustment of the TR switch will cause abnormal operation of the automatic
•
transmission. Be sure to use the SST to adjust the TR switch correctly.
14. Using the SST and by turning the TR switch, adjust the positions of the manual shaft and the TR switch
neutral hole.
15. Tighten the TR switch mounting bolts.
Tightening torque
4.46.5 N·m
o
{4566 kgf·cm, 4057 in·lbf}
(w)
RX-8 Transmission (Manual & Auto)
Page 322