Rear Abs Wheel-Speed Sensor Removal/Installation - Mazda RX-8 Manual

Hide thumbs Also See for RX-8:

Table of Contents

REAR ABS WHEEL-SPEED SENSOR

REAR ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION

1. Remove the trunk side trim.

2. Remove in the order indicated in the table.

3 Rear ABS wheel-speed sensor

3. Install in the reverse order of removal.

REAR ABS WHEEL-SPEED SENSOR INSPECTION

Installation Visual Inspection

1. Inspect the following items:

If there is any malfunction, replace the applicable part.

b. Excessive looseness or play of the ABS wheel-speed sensor

c. Deformation of the ABS wheel-speed sensor

d. Deformation or damage of the ABS sensor rotor

Clearance Inspection

1. Verify the clearance between the ABS sensor rotor and the ABS wheel-speed sensor.

If there is any malfunction, check for improper installation, and replace if necessary.

RX8 - Brakes